• Interior and exterior
• Cement tiles (new or weathered)
• Fibre cement sheeting (new or weathered)
• Previously painted substrates
• Primed metal, plaster and wooden substrates
• Flat cement/concrete roofs/wall tops
• Seals nail heads and roofing bolts
• Asbestos and fibreglass surfaces

• This product is a coating material, which prevents water penetration into the substrate
• Applied in several layers and strengthened with a suitable woven material (where required) it forms a thick protective membrane for sealing roofs & walls
• Available in several colours as well as white
• This product is based on a highly flexible and water-resistant acrylic resin emulsion
• Applied to specification it seals concrete roofs and walls preventing water penetration
• This product remains highly flexible for years even after extended exposure to the environment
• Besides its main use on concrete roofs, this product can be successfully applied on galvanized sheeting, roofing felt and Fibre cement as well as walls where craze cracking is prevalent
• This product is ideal for repair work on roofs such as sealing nail heads, leaking Flashing and repairing damaged and cracked roofing felt or cracked walls
• Ideal for use on window ledges and to seal parapet wall tops
• Highly durable and UV resistant. Highly water resistant
• Excellent long-term flexibility
• Excellent adhesion
• Excellent, no-mess application properties.
• Quick drying - two coats can be applied in one day
• Low odour
• 1-3 coats of product should be used for best results
• White and pastel colours also have the added benefit of being heat-reflective, thereby reducing room temperatures (especially for metal roofs)
• Pesticide resistance makes it suitable for use in hospitals and laboratories

• Mixing: Always stir well before use with a flat paddle
• Application Method: Brush, roller or airless spray machine
• Thinning: This product is ready for use un-thinned; thinning with water will reduce its strength
• Cleaning: Application equipment clean-up is with clean tap water

For Brush or Roller Application

• Stir well before use
• Apply a generous/thick coat of product to the area that needs protecting in small manageable sections
• Allow to dry for 4-6 hours before applying another coat
• 1 - 2 coats of this product are used for the best results. A third coat is recommended for coastal areas
• Do not apply before 09:00 and after 16:00 in the winter
• Do not apply if the temperature is 12 degrees Celsius or lower
• Do not apply exterior if it looks like rain will occur within 4-6 hours of application

For Spray Application

• Do not dilute – order product spray ready
• Apply 2 coats and allow for 2 hours of drying time between coats to achieve maximum penetration. Add 4 hours of drying time for application in cold weather.
• Apply a second coat to ensure that the surface is properly coated

Rusted Metal

• Affected areas need to be cleaned back to bright metal and spot-primed with water-based metal primer
• Remove collected sand and dust from the area
• Apply 1-2 coats of product

New Metal

• De-grease surfaces with a good quality Degreaser to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water-break-free
• Prime the clean de-greased metal with a water-based metal primer
• Rinse well with potable water
• Apply 1-2 coats of product

Uncoated Cement / Plaster Surfaces

• Remove dust, foreign material, fungal and algae growth
• Fill all visible cracks and seal with a suitable plaster primer
• Apply 1-2 coats of product

Fibre Cement Surfaces (Uncoated/Weathered/New)

• Remove dust, foreign material, fungal and algae growth
• Fill all visible cracks and seal with a suitable plaster primer
• Apply 1-2 coats of product

Previously Painted Surfaces

• Make sure old paint coatings are firm and solid
• Remove all loose, flaking and bubbling paint
• Remove all dust, grease, foreign material, fungal and algae growth
• Allow to dry
• If then powdery or friable, seal with a suitable bonding liquid or plaster primer
• Test the product for adhesion on high-gloss enamel surfaces
• If required apply 1 coat of universal undercoat and allow to dry for 6 hours before over-coating with the product
• Apply 1-2 coats of product

SPREADING RATE

• 3-5m² per 1 litre (per coat)
• Although the spreading rate will vary with porosity and type of substrate
• For un-coated new surfaces work on 3-5 square meters per litre for the first coat and 6-8 square meters per litre for subsequent coats
• For previously painted and sealed substrates work on 3-5 square meters per litre for the first coat and 6-8 square meters per litre for subsequent coats
• Do not exceed 4m² per litre when applying as a 1-coat system

DRYING TIME

• Touch dry: + 1 hour
• Hard dry: + 4-6 hours

Atlas Eco 1 (Pty) Ltd cannot be held liable if the product fails due to improper surface preparation or application.