• Exterior and interior surfaces
• Cement tiles (new or weathered), fibre cement sheeting (new or weathered)
• Previously painted substrates
• Primed metal, plaster, and wooden substrates
• Flat cement/concrete roofs and walls
• Nailheads, roofing bolts, and roof tile ridges
• Asbestos and fibreglass surfaces

• Fibre-filled coating designed to prevent water penetration into the substrate
• Available in popular roof shades, including white
• Contains fibrous particles combined with a flexible, water-resistant acrylic polymer emulsion
• Forms a thick protective waterproof skin when applied in multiple layers
• Highly flexible and UV-resistant, even after extended exposure
• Ideal for repairing roofs, sealing nail heads, leaking flashings, cracked roof tiles, and ridging
• Seals window ledges and parapet wall tops
• Quick drying – two coats can be applied in one day
• Low odor, excellent adhesion, and long-term flexibility
• Reflects heat, especially on metal roofs (white and lighter colors)

• Mixing: Stir well before use with a flat paddle
• Application Method: Brush, roller, or airless spray machine
• Thinning: Product is ready to use; thinning with water reduces effectiveness
• Cleaning: Clean tools with clean tap water

1. Stir well before use.

2. Allow drying for 4-6 hours between coats

3. Apply 2-4 coats for best results

4. Clean equipment with tap water after use

5. Do not apply if rain is expected within 4-6 hours or outside 09:00 to 16:00 in winter

Brush or Roller Application

• Apply generously in manageable sections
• Dry for 60-90 minutes between coats

Spray Application

• Use a 529 nozzle with an airless spray machine, removing filters to prevent clogging

Rusted Metal

• Clean to bright metal and prime with a water-based metal primer
• Apply 2-4 coats of Eco-Fibre Rubber Sealer

New Metal

• Degrease, rinse, prime, and apply 2-4 coats

Uncoated Cement/Plaster

• Clean surfaces, seal cracks, and apply 2-4 coats

Fibre Cement (Uncoated/Weathered/New)

• Clean surfaces, seal with bonding liquid if necessary, and apply 2-4 coats

Previously Painted Surfaces

• Remove loose paint, clean, and apply 2-4 coats

Spreading Rate

• Coverage varies by substrate porosity: 0.5 to 2 square meters per liter
• Two coats are recommended; in coastal areas, apply three coats

Finish

• Matt

Atlas Eco 1 (Pty) Ltd cannot be held liable if the product fails due to improper surface preparation or application.