Eco Advanced - Fibre Paste

• Suitable for all surfaces
• Interior and exterior use
• Galvanized and cement surfaces
• Ideal for waterproofing a variety of surfaces including roofs, walls, basements, and foundations
• Suitable for high-pressure water environments such as fishponds and dam repairs
• Fishpond and dam repairs

• Micronized fibres
• Faster and more efficient application process
• Can withstand significant water pressure
• Exceptional durability
• Easy adhesion
• Versatile repair solutions
• UV resistant
• Eco friendly
• Non-toxic
• Non-flammable
• Low VOC (EU Regulations)

• Mixing: Always stir well before use with a flat paddle
• Application Method: Brush, roller, spatula or trowel
• Thinning: Not recommended, this product is ready for use
• Cleaning: Clean application equipment with water, do not allow the product to dry on the equipment

For Brush, Roller, Spatula or Trowel Application:

• Apply a thick/generous amount of Fibre Paste to the area that requires sealing
• Apply in small, manageable sections to achieve proper penetration
• Allow to dry for 60 – 90 minutes depending on the temperature and thickness of Fibre Paste applied

Steel and Galvanized Structures

• Remove grease, oil, and other contaminants with a good quality degreasing solution.
• Use a wire brush or sandpaper to remove any rust. For heavily rusted areas, consider using a rust converter.
• Wash the surface with a mild detergent or a pressure washer to remove any remaining residue. Rinse thoroughly and let dry.
• Ensure the surface is in good condition before applying the next coat.
• Wait 60-90 minutes between coats, depending on the temperature and the thickness of Fibre Paste applied

Unpainted and Weathered Surfaces

• Scrape off any loose or flaking material and use a wire brush to clean the surface.
• Use a pressure washer or scrub with a stiff brush and cleaner to remove dirt, algae, and other contaminants.
• Ensure that the surface is sound and dry before applying Fibre Paste
• Fill and repair cracks or holes with Fibre Paste.
• Allow to cure for ±60 - 90 minutes between coats, depending on temperature and the thickness of Fibre Paste applied

Fibre-cement, Cement Tiles and Granular Tiles

• Remove all dust, dirt and loose granules, friable and powdery material with a high-pressure water jet or scrub down with a hard bristle or wire brush and water
• Ensure that the surface is sound and dry before applying Fibre Paste
• Apply a thick/generous amount of Fibre Paste to the area that needs sealing/protecting
• Apply in small manageable sections to achieve maximum penetration
• Allow to cure for 60 - 90 minutes, depending on the temperature and the thickness of Fibre Paste applied

SPREADING RATE

• Coverage will depend on the porosity of the surface and the application method

FINISH

• Matt

Eco Advanced™ cannot be held liable if the product fails due to improper surface preparation or application